How to get started with your RS485 to Wifi adaptor
You shall need to use a standard RJ45 network cable, make sure it’s not a crossover.
Once it’s connected you shall need to connect and configure your WiFi so the adaptor can connect to your network. I am using my phone and on searching for networks you shall see a new network beginning with ESP : –
On connecting to the network you shall have to open a browser and manually enter the ip address http:/192.168.4.1 note on most devices you won’t need to enter the http://
Once connected you shall see the connection screen which details the IP address of the connected network.
We have no connected network so the address is 0.0.0.0
To configure your network you shall need to select your network and then input your WiFi password. The device shall then connect to your network and when you go to the main page you should see the IP address your device has been given.
Your device is now configured for your wireless network and you can connect to it via an application such as https://www.hw-group.com/software/hw-vsp3-virtual-serial-port or socat if using linux.